10.99
4
Working with the software
The idea behind the COM 720 software is to have an efficient tool with which to program the
WS720 single axis controller. The convenient operating system facilitates the manipulation of
machine data, part programs and control configurations.
The COM 720 software can be used either ON or OFF line
4.1
Starting display
This following display appears after the COM 720 software has been called up:
Fig. 4.1 Starting display
The field surrounding the
software, either click the "Continue" field with the mouse or press .
© Siemens AG 1993 All Rights Reserved
WS 720 A (BN - COM 720 description)
is known as a "pushbutton". To proceed further with the
6ZB5 440-0RV02
Working with the software
4 - 1