10.99
4.3
Selection of data type
At this window the data type is selected, either machine data, part programs or control
configuration.
Fig. 4.3 Selection of data type
Title line
Data group name
Data branch or type
© Siemens AG 1993 All Rights Reserved
WS 720 A (BN - COM 720 description)
Display of the path and of the machine file name.
Input field or display of the name of the selected data group. 10
alphanumeric characters are allowed. The list shows all the data
groups which contain the selected data type. "NONAME" will be
shown if no name has yet been issued.
Selection of the data branch, whereby the possibilities are
machine data, part programs and OFFLINE control
configuration.
6ZB5 440-0RV02
Working with the software
4 - 3