Advertisement
MASKINFABRIK
HARALDSVEJ21
DK-8900 PANDERS
TLF. + 45 86 43 51 55
FAX. + 45 86 43 51 00
Instructions manual
MORS0 Mitring machine
Model F
FUNCTIONAL DESCRIPTION
B-2
picture B-2-1
I
Beware of the extreme
sharp knives
Machine Description
The MORS0-F is constructed as a compact
machine with a solid dimensioned frame (1),
with built in lever system (2).
The cutting function (3) is placed on top of
the machine.
In the slide frame (4) fitted at the cross (5)
the knife block (6) is moved up and down. The
cross (5) runs in the guidings of the table.
The knives (7) fitted on the knife block cut
the moulding.
The conveying (forward
movement)
of
the
knife block takes place manually.
The moulding is placed
on the
table (8)
against the fences (9) + (10) adjusted in the
angle required.
The rebate supports (11) are adjusted to the
height of the rebate.
The length of the finished moulding is ad-
justed by means of the stop block (12). The
measurements are read from the scales (13)
on the table extension (14).
MORS0 F -9503 B-2/gb1
Advertisement
