Advertisement
I
g_
MASKINFABRI
HARALDSVEJ21
DK-8900 RANDERS
TLF. + 45 86 43 51 55
FAX. + 45 86 43 51 00
Instructions manual
MORS0 Mitring machine
Model F
picture B-1-1
FUNCTIONAL DESCRIPTION
B-1
Beware of the extreme
sharp knives
General Description
MORS0-F mitring machine is an important
help to make mitres in wooden mouldings for
all purposes.
MORS0-F is a manual foot-operated
machine.
The operation in easy.
MORS0-F mitring machine is provided with
sliding
longitudinal stop,
measuring
scale,
adjustable fences (45°-90 ) on both sides of
the knives, adjustable rebate supports.
MORS0-F cuts double mitre at 45 and single
mitre up to 90°.
With
the
MORS0-F you achieve
a
quite
smooth, clean, and exact cut when you cut
the work piece in two cuts.
This is done manually on the MORS0-F.
The conveying (forward movement)
of
the
knive block is made so that the last cut is a
so-called trim-cut.
A special lever system makes the operation of
the machine very easy. Twin return springs
bring the knife block back to starting position.
The height
movement
of the
knife block
(length of stroke) is contineously adjustable.
The pieces of moulding can be joined without
any finishing.
(Picture B-1-1).
MORS0 F -9503 B-1/gb1
Advertisement
