Simplex TrueAlarm 4100 Series Manual page 7

Product Selection (Continued)
Audio Amplifiers
(supervisory current is with "switch to battery" selected)
4100/4120-
0251 25 VRMS, 25 W, without Power Supply
25 VRMS, 100 W, with 230 VAC Power
0263
Supply
Audio Equipment Options
4100/4120-
0254 Microphone and Enclosure
0255 Master Phone
0206 Redundant Tone Generator
0215 Phone Riser Terminal Board
Standard Message Set (Custom
0220
Messages are Available)
Annunciation Equipment
4100/4120-
0301 64/64 LED/Switch Controller, Internal
0302 24 Point I/O Graphic Interface, Internal
0431 Eight Red LED Module
0432 16 Red/Yellow LED Module
8/8 Momentary Switch/Yellow LED
0433
Module
8/16, 3 Position Maintained
0434
Switch/Yellow-Yellow LED Module
0435 8/16 Momentary Switch/LED Module
Network Equipment
Model
4120-6014 Modular Network Interface Board
4120-0142 Wired Media Card
4120-0143 Fiber Optic Media Card
Cabinets and Accessories
4100/4120-
2052 Four Unit
2053 Six Unit
2062 Four Unit
2063 Six Unit
2975-9405 Four Unit Beige Cabinet, CE Compliant
2975-9406 Six Unit Beige Cabinet, CE Compliant
2975-9801 Semi-Flush Trim
Remote Mount Options
4100/4120-
4604-9202UK Remote LCD Panel
24 Point Graphic Interface Module,
7401*
Remote
7402* 64/64 LED/Switch Controller, Remote
7403* 32 Point LED Driver Module, Remote
7404* 32 Point Switch Input Module, Remote
0440 Remote Microphone Enclosure
0441 Remote Phone
(2) LPC Approval pending.
(3) Tested by LPC to verify that no detrimental effect occurred to mandatory EN54 functions.
* Refer to Simplex document S4100-0005 for additional information.
Simplex Time Recorder Co.
Description LPC Status
Description LPC Status
Description LPC Status
Description LPC Status
Description LPC Status
with Glass Door
with Solid Door
Description LPC Status
Quantity
(3) As Required
Quantity
(3)
As Required
N.A.
Quantity
(2)
N.A.
As Required
(2)
Quantity
N.A. As Required
Quantity
Choose One Per
Cabinet
(2)
Choose One Per
Cabinet
N.A. As Required
Quantity
One maximum if
required (see page 4)
N.A.
As Required
7
Standby Alarm Module Size
36 mA 2.2 A 2" Internal
68 ma 8.75 A 8" Internal
Standby Alarm Module Size
3 mA 7 mA
4" Retainer
22 mA 142 mA
45 mA 45 mA ––
Not applicable
Standby Alarm Module Size
15 mA 260 mA
2" Internal
34 mA 75 mA
Not applicable 2" Retainer
Standby Alarm Module Size
35 mA 35 mA 2" Internal
40 mA 40 mA
N.A.
25 mA 25 mA
Standby Alarm Module Size
Not applicable
Standby Alarm Module Size
60 mA 200 see p. 4
42 mA + 78 mA +
switch loads* outputs*
6 1/2" x12 1/4"
(165 x 311 mm)
67 mA + 285 mA fully
switch loads* loaded*
3 1/4" x 12 1/4"
current is included
(83 x 311 mm)
with control module
3 mA 7 mA
4" Retainer
N.A.
S4100-0025 (EN54) 5/99