Specifications
Table 3
Standard Laser Source Module Specifications
Laser Type
1
Center Wavelength
Fiber Type
1, 2
Spectral width (rms)
Output power (Class 1)
4, 5
CW power stability
short term (15 min)
long term (24 h)
to backreflection (RL ≥ 14 dB)
Dimensions (H x W x D)
Weight
Recalibration Period
Operating Temperature
Humidity
4
Warm-up time
1 Central wavelength is shown on display
2 rms: root mean square
26
Laser Source Module
Specifications
Laser Source Module Specifications
(Standard modules, 0 dBm)
Specifications apply to the end of a 2-meter long fiber cable (as
specified under fiber type) with Diamond
connectors attached. All specifications are valid for an attenuation
setting of 0.0 dB.
All modules require straight output connectors.
81650A
1310 nm
±15 nm
< 3.5 nm
3
Agilent 81650A/1A/2A/4A/5A/6A/7A User's Guide, Third Edition
81651A
Fabry-Perot Laser Diode
1550 nm
±15 nm
single-mode 9/125 µm
< 4.5 nm
> 0 dBm (1 mW)
< ± 0.005 dB
typ. < ± 0.003 dB with coherence control active
typ. ± 0.03 dB
typ. ± 0.003 dB
75 mm × 32 mm × 335 mm (2.8" × 1.3" × 13.2")
0.5 kg
2 years
0°C to +45°C
Non-condensing
60 minutes
Laser Source Module Specifications
®
HMS-10/Agilent
81652A
1550/1625nm
1310/1550nm
±15 nm
< 4.5 / 5.5 nm
< 3.5 / 4.5 nm
81654A
±15 nm