Use In Hazardous Areas - Siemens SITRANS LR560 Operating Instructions Manual

Safety notes
2.2 Use in hazasdfdsardous areas
with or damage this device. However, devices found to interfere with primary licensing
operations will be required to be removed at the user's expense.
3. The installer/user of this device shall ensure that it is at least 10 km from the Penticton radio
astronomy station (British Columbia latitude: 49° 19' 12" N, longitude: 119° 37'12" W). For
devices not meeting this 10 km separation (e.g. the Okanagan Valley, British Columbia) the
installer/ user must coordinate with and obtain the written concurrence of the Director of the
Penticton radio astronomy station before the equipment can be installed or operated. The
Director of the DRAO may be contacted at 250-497-2300 or at NRC.DRAO-
OFR.CNRC@nrc-cnrc.gc.ca. (Alternatively, the Manager, Regulatory Standards, Industry
Canada, may be contacted.)
2.2 Use in hazasdfdsardous areas
Qualified personnel for hazardous area applications
Persons who install, connect, commission, operate, and service the device in a hazardous area
must have the following specific qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and systems
according to the safety regulations for electrical circuits, high pressures, aggressive, and
hazardous media.
● They are authorized, trained, or instructed in carrying out work on electrical circuits for
hazardous systems.
● They are trained or instructed in maintenance and use of appropriate safety equipment
according to the pertinent safety regulations.

Use in hazardous areas

Risk of explosion.
• Only use equipment that is approved for use in the intended hazardous area and
labelled accordingly.
18
WARNING
SITRANS LR560 (mA/HART)
Operating Instructions, 06/2017, A5E34647946-AD