About Global Configurator (With Gc Professional And Gc Plus Modes); Pc System Requirements - Extron electronics MediaLink MLC Plus 84 Series User Manual

About Global Configurator (with GC Professional and GC Plus Modes)
Use Extron Toolbelt software to discover and manage the MLC Plus Series controller and
other Extron control products. Configure the controller using Extron Global Configurator
software running in Global Configurator Professional (GC Professional) or Global
Configurator Plus (GC Plus) mode.
Global Configurator:
•
•
•
To obtain Extron control product software, you must have an Extron Insider account and
contact an Extron support representative. Extron provides training to our customers on how
to use the software. Access to Global Configurator Professional is available to users who
successfully complete Extron Control Professional Certification.

PC System Requirements

To find the minimum hardware and software requirements for the PC you use to configure
the MLC Plus 84 Series:
•
•
Loads device drivers for monitoring the status of and controlling devices within the AV
system.
Creates the configuration containing all the settings for the controller and the products
with which it interacts in the AV system.
Uploads the configuration to the unit.
Visit the Download page (http://www.extron.com/download/index.aspx) on the
Extron website and navigate to web page for the specific software package (such as
Global Configurator). Minimum system requirements are listed in the description section.
In some cases, minimum device firmware version requirements are also listed there.
If system requirements are not listed on the software package web page, contact an
Extron support representative.
MLC Plus 84 Series • Introduction 5