Emerson Rosemount 6888C Instruction Manual page 4

In-situ combustion oxygen analyzer for use in hazardous areas
Hide thumbs Also See for Rosemount 6888C:
Table of Contents

Advertisement

July 2018
7.
Where equipment or covers are marked with the symbol to the right, hazardous
voltages are likely to be present beneath. These covers should only be removed
when power is removed from the equipment - and then only by trained service
personnel.
8.
Where equipment or covers are marked with the symbol to the right, there is a
danger of hot surfaces beneath. These covers should only be removed by trained
service personnel when power is removed from the equipment. Certain surfaces
may remain hot to the touch.
9.
Where equipment or covers are marked with the symbol to the right, refer to the
instruction manual for instructions.
10. All graphical symbols used in this product are from one or more of the following standards: EN61010, IEC417, and ISO3864.
11. Where equipment or labels are marked "Do Not Open While Energized" or similar, there is a danger of ignition in areas where
an explosive atmosphere is present. This equipment should only be opened when the power is removed and adequate time as
specified on the label or in the instruction manual has been allowed for the equipment to cool down - and then only by trained
service personnel.
4
Instruction Manual
00809-0100-4891
6888C

Advertisement

Table of Contents
loading

Table of Contents