1
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
2
Attach the Double DIN brackets to
the Double DIN trim plate. (Figure A)
Slide the Double DIN head unit or
3
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure B)
Reassemble dash in reverse order of
4
disassembly.
METRA ACCESSORIES
95-3105
DOUBLE DIN / STACKED ISO DIN
HEAD UNIT PROVISION
KIT ASSEMBLY
A
B
STEREO DASH KITS