Table of Contents
Advertisement
Table 4-1. Agilent 83487A Electrical Channel Vertical Specifications (Continued)
20 GHz
Scale Factor (full scale is eight divisions)
Minimum
Maximum
dc Offset Range
Nominal Impedance
Connector
Reflections
Dynamic Range
Maximum Safe Input Voltage
a. It is recommended that a user vertical calibration be performed after every 10 hours of continuous use or if the temperature has changed
°
by greater than 2
C from the previous vertical calibration.
∆
b. Where
T
represents the temperature change in Celsius from the last user vertical calibration. Note that the temperature term goes to
cal
zero upon execution of a vertical calibration.
∆
c. Where
Time
represents the time since the last user vertical calibration. The uncertainty due to time typically stabilizes after 24 hours.
cal
This term goes to zero upon execution of a vertical calibration.
Specifications and Regulatory Information
Specifications
≤
1 mV (0.5 mV typical)
1 mV/div
100 mV/div
±
500 mV
Ω
50
3.5 mm (m)
≤
5% for 30 ps rise time
±
400 mV relative to channel offset
16 dBm peak ac
4-4
±
2V dc
Advertisement
Table of Contents
