Agilent Technologies 83487A User Manual page 12

C A U T I O N
C A U T I O N
Getting Started
Getting Started
Getting Started
This chapter gives a description of the plug-in module, lists options and acces-
sories, explains menu and key conventions used, shows how to install your
Agilent 83487A, and gives information for returning the plug-in module for
service.
Refer to Chapter 2, "Channel Setup Menu" for information on operating the
plug-in module.
Refer to Chapter 3, "Calibration Overview" for calibration information.
Refer to Chapter 4, "Specifications and Regulatory Information" for informa-
tion on operating conditions, such as temperature.
This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2, per IEC 1010 and 664 respectively.
The input circuits can be damaged by electrostatic discharge (ESD).
Therefore, avoid applying static discharges to the front-panel input connectors.
Before connecting any coaxial cable to the connectors, momentarily short the
center and outer conductors of the cable together. Avoid touching the front-
panel input connectors without first touching the frame of the instrument. Be
sure that the instrument is properly earth-grounded to prevent buildup of
static charge. Refer to "Electrostatic Discharge Information" on page 5-12.
1-2