Alarms
Alarm settings
(Cardiac Science 5350 only)
About setting mode
In order to set an alarm, it is necessary to put this unit into Setting Mode by pressing the
Menu/Enter switch.
For additional information on Setting Mode, see
Alarm setting screens
Press the Menu/Enter switch until the Alarm Setting screen you want to change appears.
Here are the following types of Alarm Setting screens:
SYS upper limit
1.
SYS lower limit
2.
DIA upper limit
3.
DIA lower limit
4.
PR upper limit
5.
PR lower limit
6.
SpO
upper limit
7.
2
SpO
lower limit
8.
2
70-00582-01 A
8-2
Setup
on page 10-1.
Cardiac Science 5300/5350 Vital Signs Monitor