Safe Use Of Transfer Switch; Load Management Options - Generac Power Systems 006852 Owner's Manual

Section 2: General Information
The conductor size range is as follows:
PIB Wire Range
Rating
30A 1/0 - 14
AWG

Safe Use of Transfer Switch

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Before installing, operating or servicing this equipment,
read the SAFETY RULES carefully. Comply strictly with
all SAFETY RULES to prevent accidents and/or damage
to the equipment. The manufacturer recommends that a
copy of the SAFETY RULES be posted near the transfer
switch. Also, be sure to read all instructions and
information found on tags, labels and decals affixed to
the equipment.
Publications that outline the safe installation and
manufacturing of transfer switches are the following:
• NFPA 70; National Electrical Code
• UL 1008, STANDARD FOR SAFETY-AUTOMATIC
TRANSFER SWITCHES
• UL67 Panel boards
NOTE: To ensure code compliance, it is essential to use
the latest version of any standard that has been adapted
by your local municipality.

Load Management Options

Loads can be managed using a smart power
management system. The system can accommodate up
to eight individual Smart Management Modules (SMM).*
NOTE: The SMM modules are self-contained and have
individual built-in controllers.
*See SMM Module (available separately)
4
Conductor Lug
Tightening Temp.
Torque Rating
50 in-lbs 167°F (75°C)
(5.6 Nm)
(000100a)
Homelink Upgradeable Manual Transfer Switch Owner's Manual