Transfer Switch Data Label; Transfer Switch Enclosure; Safe Use Of Transfer Switch - Generac Power Systems HTS Owner's Manual

2.4 — Transfer Switch Data Label
A data label is permanently affixed to the transfer switch
enclosure. Use this transfer switch only with the specific
limits shown on the data label and on other decals and
labels that may be affixed to the switch. This will prevent
damage to equipment and property.
When requesting information or ordering parts for this
equipment, make sure to include all information from the
data label.
2.5 — Transfer Switch Enclosure
The standard switch enclosure is a National Electrical
Manufacturer's Association (NEMA) 12 type. NEMA 12
type enclosures primarily provide protection against con-
tact with the enclosed equipment and provide a degree of
protection against dust, falling dirt, and dripping non-cor-
rosive liquids. NEMA 12 type enclosures are for indoor
use only.
2.6 — Safe Use of Transfer Switch
Before installing, operating or servicing this equipment,
read the safety rules carefully. Comply strictly with all
safety rules to prevent accidents and/or damage to the
equipment. The manufacturer recommends that a copy
of the safety rules be posted near the transfer switch.
Also, be sure to read all instructions and information
found on tags, labels and decals affixed to the equip-
ment.
Publications that outline the safe use of transfer switches
are the following:
•
NFPA 70; National Electrical Code
• NFPA 70E; Standard for Electrical Safety in the
Workplace
• UL 1008, Standard for Safety-Automatic Transfer
Switches
NOTE: It is essential to use the latest version of any standard to
ensure correct and current information.
Automatic Transfer Switch Owner's Manual
General Information
5