Introduction; Figure 3: The Ethernet Communications Adapter; Figure 4: The Ethernet Option In The Av38 Local Display (Front And Rear Views) - Thermo Scientific AquaSensors AV38 User Manual

2 Introduction

This document describes the configuration and operation of the Thermo Scientific
AquaSensors Ethernet Communications product. It applies to V1.02.00 firmware or later.
The product is offered in two forms. The first form is as a Communications Adapter as
shown in Figure 3 that is plugged into the DataStick Body.

Figure 3: The Ethernet Communications Adapter.

The second form is as an option in the AV38 Local Display as shown in Figure 4.

Figure 4: The Ethernet option in the AV38 Local Display (front and rear views).

The product provides full-featured measurement, configuration, calibration and
diagnostics of any DataStick™ measurement system from any Ethernet-enabled device
via resident Web pages, EtherNet/IP, Modbus TCP, or Programmable Controller
Communication Commands (PCCC). An intermediate analyzer is not required.
™ ™
Thermo Scientific AquaSensors DataStick Ethernet Communications User Guide 7