Table of Contents
Advertisement
www.ti.com
7 Device and Documentation Support
7.1
Device Support
7.1.1 Device Nomenclature
To designate the stages in the product development cycle, TI assigns prefixes to the part numbers. Each
device has one of three prefixes: X, P, or null (no prefix) (for example, CC1020 is in production; therefore,
no prefix is assigned).
Device development evolutionary flow:
X
Experimental device that is not necessarily representative of the final device's electrical
specifications and may not use production assembly flow.
P
Prototype device that is not necessarily the final silicon die and may not necessarily meet
final electrical specifications.
null
Production version of the silicon die that is fully qualified.
Production devices have been characterized fully, and the quality and reliability of the device have been
demonstrated fully. TI's standard warranty applies.
Predictions show that prototype devices (X or P) have a greater failure rate than the standard production
devices. Texas Instruments recommends that these devices not be used in any production system
because their expected end-use failure rate still is undefined. Only qualified production devices are to be
used.
TI device nomenclature also includes a suffix with the device family name. This suffix indicates the
package type (for example, RSS).
For orderable part numbers of CC1020 devices in the RSS package types, see the Package Option
Addendum of this document, the TI website (www.ti.com), or contact your TI sales representative.
7.2
Documentation Support
The following documents describe the CC1020 device. Copies of these documents are available on the
Internet at www.ti.com.
1. [1] AN022 CC1020 Crystal Frequency Selection (SWRA070)
2. [2] AN029 CC1020/1021 Automatic Frequency Control (AFC) (SWRA063)
3. [3] AN030 CC1020/1021 Received Signal Strength Indicator (SWRA062)
4. [4] AN070 CC1020 Automatic Power-Up Sequencing (SWRA279)
5. [5] AN023 CC1020 MCU Interfacing (SWRA069)
6. [6] CC1020 Errata Note 004, available in the
7. [7] CC1020 Errata Note 002, available in the
8. [8] AN001 SRD Regulations For License Free Transceiver Operation (SWRA090).
9. [9] AN027 Temperature Compensation by Indirect Method (SWRA065)
10. [10] AN003 SRD Antennas (SWRA088)
11. [11]
SmartRF Studio
12. [12]
CC1020EMX
7.2.1 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the
respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views;
see TI's
Terms of
Use.
TI E2E™ Online Community
Copyright © 2006–2015, Texas Instruments Incorporated
Evaluation Module
TI's Engineer-to-Engineer (E2E) Community. Created to foster
Submit Documentation Feedback
Product Folder Links:
SWRS046H – NOVEMBER 2006 – REVISED MARCH 2015
CC1020
product folder.
CC1020
product folder.
Device and Documentation Support
CC1020
CC1020
87
Advertisement
Table of Contents
