Safety Switch-Off - Miele KM 6520 FR Operating And Installation Instructions

Safety features

Safety switch-off

Safety switch-off if the sensors are
covered
Your hob will switch off automatically if
one or several of the sensors remain
covered for longer than 10 seconds, for
example, by finger contact, food boiling
over or by an object such as an oven
glove or tea towel.  will appear in the
timer display for a few seconds. If
the  sensor is affected,  will light up
until the object or soiling has been
removed.
 will go out once you have removed
the object or cleaned the hob and the
hob will be ready to use again.
Safety switch-off with an overlong
cooking time
The safety switch-off mechanism is
triggered automatically if one of the
cooking zones is heated for an
unusually long period of time. This
period of time depends on the power
level selected. Once exceeded, the
cooking zone switches off and the
residual heat indicators appear. The
cooking zone can be operated again
after it has been switched off and back
on.
The hob is programmed to safety
setting 0 at the factory. If necessary, a
higher safety setting with a shorter
maximum operating time can be set
(see chart).
36
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Setting
range").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00 5:00
10:00 7:00 4:00
5:00 4:00 3:00
5:00 3:30 2:00
4:00 2:00 1:30
4:00 1:30 1:00
4:00 1:00 0:30
4:00 0:42 0:24
4:00 0:30 0:20
4:00 0:30 0:18
1:00 0:24 0:10
2