Switching On An Extended Zone/Outer Ring - Miele KM 6520 FR Operating And Installation Instructions

Switching on an extended
zone/outer ring
If you switch a double or triple cooking
zone on, the second heater element is
always switched on automatically. The
second heater element of an extended
cooking zone and the third heater
element of a triple zone must be
manually switched on.
On hobs with one multi-circle cooking
zone/extended zone, the indicator light
to show that these are switched on
lights up constantly. On hobs with two
or more multi-circle cooking zones/
extended zones the indicator light to
show that these are switched on only
lights up whilst the cooking zone
display is flashing. There is no
difference in the display between the
second and the third heater element of
a three circle cooking zone.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Switching the heater element off
 Briefly touch the display for the
required cooking zone.
The cooking zone display starts to flash
and the indicator light for the extended
outer zone lights up.
 While the cooking zone display is
flashing, touch the  sensor
repeatedly until the indicator light for
the extended outer zone goes out.
Switching the heater element on
 Briefly touch the display for the
required cooking zone.
The cooking zone display will begin to
flash.
 Touch the  control whilst the
cooking zone display is flashing.
The indicator light for the extended /
outer zone will light up.
 Set the power level you want.
Operation
27