RHINO 2410 Operator's Manual page 26

SAFETY
WARNING! - Crushing Hazard.
-To Avoid Serious Injury or Death
Make sure attachment is securely attached to the loader.
See Operator's Manual for instructions.
-Lock both levers down. Make sure pins are adequately
extended through slots at the bottom of the attachment
bracket and the tapered side of pin is firmly seated
against attachments slots. Make sure the gap is not
larger than 1/8".
-Tilt attachment down, lower to ground, apply down
pressure, and drag backwards. Do not use attachment if
it disengages.
-NEVER walk or work underneath raised loader or
attachment
(Located on the Quick Attach Device Only)
P/N D516
2410 02/10 Safety Section 1-22
© 2010 Alamo Group Inc.