Table of Contents
Advertisement
7. DIP Switch Settings
• The temperature swing can be adjusted between 0.5°C and 1.0°C by
selecting the desired DIP switch position found on the rear of the unit.
We suggest using 0.5°C position unless the boiler turns ON and OFF
too rapidly. Press the reset button after changing.
• The PID 'Proportional-Integral-Derivative' can also be selected ON or OFF
using the DIP switches on the rear of the unit. We suggest setting this to
the ON position. As the room temperature approaches the set temperature,
the thermostat will intermittently turn the heating ON and OFF, to help
prevent temperature over-shoot. Press the reset button after changing.
• The boiler type can be set to either 3CYC (Gas) or 6CYC (Oil), using the
DIP switches on the rear of the unit. Press the reset button after changing.
TRT033N Rear of Unit
DIP switch for PID setting
6
DIP switch for
boiler type setting
DIP switch for temperature
swing adjustment setting
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TRT033N and is the answer not in the manual?
Questions and answers
Just purchased a small Flat with two thermostats not sure how to set heating on off times?
The Timeguard TRT033N thermostat does not have programmable heating on and off times. Instead, it operates by maintaining a set temperature, which can be adjusted using the +/- buttons. The thermostat will automatically turn the heating on and off as the room temperature approaches the set temperature. Additionally, the night set-back function allows the temperature to be reduced by 4°C for 1-9 hours.
This answer is automatically generated