Table of Contents
Advertisement
8. Operation
• Restore mains to the unit after making sure to check all system wiring
is complete, and after you have selected the desired DIP switch settings.
• Press the reset button located beneath the flip down cover on the front
of the unit, all of the characters will briefly appear on the display,
followed by the current room temperature.
• The default set temperature is 22°C.
7
Adjusting Set Temperature
• Use the +/- setting buttons to change the set temperature.
• The set temperature will flash while the change is being made.
• The set temperature change will be made in 0.5 degree increments,
and the +/- button surround and display light will illuminate upon setting.
• The set temperature and illumination will time out 5 seconds after the last
button press, saving your settings, and the display will revert to show the
current room temperature.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TRT033N and is the answer not in the manual?
Questions and answers
Just purchased a small Flat with two thermostats not sure how to set heating on off times?
The Timeguard TRT033N thermostat does not have programmable heating on and off times. Instead, it operates by maintaining a set temperature, which can be adjusted using the +/- buttons. The thermostat will automatically turn the heating on and off as the room temperature approaches the set temperature. Additionally, the night set-back function allows the temperature to be reduced by 4°C for 1-9 hours.
This answer is automatically generated