Table of Contents
Advertisement
RUGGEDCOM WIN7025
Installation Guide
1.
Review the relevant certification information for any regulatory requirements. For more information, refer to
Section 5.1,
"Approvals".
2.
Select an appropriate site and perform a site survey. For more information, refer to
Preparation and
3.
Unpack and inspect the base station components. For more information, refer to
Base
Station".
4.
Mount the base station to a pole, wall or tower. For more information, refer to
Base
Station".
5.
Install and connect the antenna(s). For more information, refer to
6.
For Class I, Division 2 hazardous locations only, connect a RUGGEDCOM WIN1212. For more information,
refer to
Section 2.8.4, "Installing the Hazardous Location
7.
Make sure the base station is grounded. For more information, refer to
Station".
8.
Connect the base station to a power source and the network. For more information, refer to
"Connecting Power and
9.
Seal all cable connections. For more information, refer to
10. Configure the base station. For more information, refer to
Section 2.2
Unpacking the Base Station
The following items are included in the RUGGEDCOM WIN7025 package:
Item
RUGGEDCOM WIN7025 Base Station
Pole/wall/tower mounting kit
DB9 Female to 3-Pin Male RS232 Cable, 2 m (6.6 ft)
GPS antenna
Power supply for PEC (copper) and SFA (optical) configurations
coaxial cable, 900 mm (35.4 in) long
Radio Frequency (RF) antenna cables, CAT-5, 1.5 m (4.9 ft) long
When unpacking the base station, do the following:
1.
Inspect the package for damage before opening it.
2.
Visually inspect each item in the package for any physical damage.
3.
Verify all items are included.
IMPORTANT!
If any item is missing or damaged, contact Siemens for assistance.
Unpacking the Base Station
Precautions".
Data".
Section 2.5, "Mounting the
Section 2.6, "Installing
Kit".
Section 2.7, "Grounding the Base
Section 2.9, "Weatherproofing the Base
Section 3.2, "Configuring the Base
Chapter 2
Installing the Base Station
Section 2.3, "Site
Section 2.2, "Unpacking the
Antennas".
Section 2.8,
Station".
Station".
Quantity
1
1
1
1
1
1
2
9
Advertisement
Table of Contents
