Table of Contents
Advertisement
RUGGEDCOM WIN7025
Installation Guide
Power Supply
• 85 to 265 VAC
• Power requirement: 48 VDC
• 37 to 60 VDC (customer supplied for SFD version)
Hazardous Location Certification
• Class I, Division 2
• ATEX Zone 2
Section 1.2
Description
The RUGGEDCOM WIN7025 features various types of ports for connecting antennas and data adapters, and for
interfacing with the device. Options are based on the base station type.
Figure 1: RUGGEDCOM WIN7025 Communication Ports for PEC Model
1. ANT1 Port 2. GPS Port 3. DC/ETH Port 4. RS232 Serial Console Port 5. ANT2 Port
Figure 2: RUGGEDCOM WIN7025 Communication Ports for SFA and SFD Models
1. ANT1 Port 2. GPS Port 3. DC/ETH Port 4. RS232 Serial Console Port 5. F/O Port 6. ANT2 Port
RS-232 Serial Console Port
Description
1
2
3
4
1
2
3
4
A 3-pin serial console port for interfacing directly with the base station and accessing low-
level management functions. For more information about this port, refer to the RUGGEDCOM
WIN Base Station User Guide.
3
5
5
6
Chapter 1
Introduction
3
Advertisement
Table of Contents
