Configuration Example; Network Requirements; Configuration Procedure - H3C WX5500H series User Configuration Manual

Step
12. (Optional.) Display the
priority marking
configuration.

Configuration example

Network requirements

As shown in
Traffic source
Client A, B
Client A, B
Client A, B
Figure 8 Network diagram
Client A
Client B

Configuration procedure

# Create advanced ACL 3000, and configure a rule to match packets with destination IP address
192.168.0.1.
<AC> system-view
[AC] acl advanced 3000
[AC-acl-ipv4-adv-3000] rule permit ip destination 192.168.0.1 0
[AC-acl-ipv4-adv-3000] quit
# Create advanced ACL 3001, and configure a rule to match packets with destination IP address
192.168.0.2.
[AC] acl advanced 3001
[AC-acl-ipv4-adv-3001] rule permit ip destination 192.168.0.2 0
[AC-acl-ipv4-adv-3001] quit
# Create advanced ACL 3002, and configure a rule to match packets with destination IP address
192.168.0.3.
[AC] acl advanced 3002
Command
display traffic behavior { system-defined |
user-defined } [ behavior-name ] [ slot
slot-number ]
Figure 8, configure priority marking on the AC to meet the following requirements:
Destination
Data server
Mail server
File server
IP network
AP
Switch
GE 1/0/1
AC
34
Remarks
Available in any view.
Processing priority
High
Medium
Low
Data server
192.168.0.1/24
Mail server
192.168.0.2/24
File server
192.168.0.3/24