Configuring Packet Filtering With Acls; Applying An Acl To An Interface For Packet Filtering - H3C WX5500H series User Configuration Manual

Step
Copy an existing ACL to create a new ACL.
2.

Configuring packet filtering with ACLs

This section describes procedures for applying an ACL to filter incoming or outgoing IPv4 or IPv6
packets on the specified interface.
This feature does not take effect on an interface that is an aggregation member port.

Applying an ACL to an interface for packet filtering

The following matrix shows the feature and hardware compatibility:
Hardware series
WX1800H series
WX2500H series
WX3000H series
WX3500H series
WX5500E series
WX5500H series
Access controller modules
Command
acl [ ipv6 | mac ] copy { source-acl-number | name
source-acl-name } to { dest-acl-number | name
dest-acl-name }
Model
WX1804H
WX1810H
WX1820H
WX2510H
WX2540H
WX2560H
WX3010H
WX3010H-L
WX3010H-X
WX3024H
WX3024H-L
WX3508H
WX3510H
WX3520H
WX3540H
WX5510E
WX5540E
WX5540H
WX5560H
WX5580H
EWPXM1MAC0F
EWPXM1WCME0
EWPXM2WCMD0F
LSQM1WCMX20
LSQM1WCMX40
LSUM1WCME0
LSUM1WCMX20RT
LSUM1WCMX40RT
11
Feature compatibility
Yes
Yes
No
Yes
Yes
Yes
Yes