Displaying And Maintaining Qos Policies - H3C WX5500H series User Configuration Manual

Hardware series
You can apply a QoS policy to multiple user profiles. In one direction of each user profile, only one
policy can be applied. To modify a QoS policy already applied to a direction, first remove the applied
QoS policy.
To apply a QoS policy to a user profile:
Step
Enter system view.
1.
Enter user profile view.
2.
Apply the QoS policy.
3.

Displaying and maintaining QoS policies

Execute display commands in any view.
Task
Display traffic class configuration.
Display traffic behavior configuration.
Display QoS policy configuration.
Display information about QoS policies
applied to interfaces.
Display information about QoS policies
applied to user profiles.
NOTE:
Support for the display qos policy user-profile command depends on the device model. For more
information, see ACL and QoS Command Reference.
Model
EWPXM1WCME0
EWPXM2WCMD0F
LSQM1WCMX20
LSQM1WCMX40
LSUM1WCME0
LSUM1WCMX20RT
LSUM1WCMX40RT
Command
system-view
user-profile profile-name
qos apply policy
policy-name { inbound |
outbound }
Command
display traffic classifier { system-defined | user-defined }
[ classifier-name ] [ slot slot-number ]
display traffic behavior { system-defined | user-defined }
[ behavior-name ] [ slot slot-number ]
display qos policy { system-defined | user-defined }
[ policy-name [ classifier classifier-name ] ] [ slot slot-number ]
display qos policy interface [ interface-type interface-number ]
[ inbound | outbound ]
display qos policy user-profile [ name profile-name ] [ user-id
user-id ] [ slot slot-number ] [ inbound | outbound ]
22
Feature compatibility
Remarks
N/A
The configuration made in user profile view
takes effect only after it is successfully issued
to the driver.
Use the inbound keyword to apply the QoS
policy to the incoming traffic of the device
(traffic sent by the online users). Use the
outbound keyword to apply the QoS policy
to the outgoing traffic of the device (traffic
received by the online users).