Displaying And Debugging Qos Configuration - H3C S9500 Series Operating Manual

Routing switches

Hide thumbs Also See for S9500 Series:

Table of Contents

Operation Manual – QoS

H3C S9500 Series Routing Switches

command, but the index value may change while the system is running. However, you

are not recommended to assign a system index if not urgently necessary.

See the corresponding command manual for details on the commands.

Note:

The index specified by the tc-index keyword should be in the range of 0 to 12288. A

value of 0 specifies the system to assign indexes automatically.

1.3 Displaying and Debugging QoS Configuration

Display traffic mirroring

configuration of a specific

or all ports

Display priority marking

configuration of a specific

or all ports

Display traffic redirecting

configuration of a port

Display traffic accounting

configuration of a specific

or all ports

Display port mirroring

configuration

Display QoS

configurations of a

specific or all ports

Display the drop mode of

the output queues of a

specific or all ports

Display rate limiting

configuration of a specific

or all ports

Display queue scheduling

configuration of a specific

or all ports

Display traffic shaping

configuration of a specific

or all ports

To do...

display qos-interface