H3C S9500 Series Operating Manual page 74

Operation Manual – QoS
H3C S9500 Series Routing Switches
To do...
Display traffic
mirroring
information on the
specified or all
WAN interfaces
Display rate
limiting
information on the
specified or all
WAN interfaces
Display priority
marking
information on the
specified or all
WAN interfaces
Display traffic
redirecting
information on the
specified or all
WAN interfaces
Display traffic
accounting
information on the
specified or all
WAN interfaces
Display traffic rate
statistics for the
specified or all
WAN interfaces
Display packet
filtering
information on the
specified or all
WAN interfaces
WAN-ACL configuration has the following restrictions:
WAN-ACL only supports ACLs based on the default flow template. For a
WAN-ACL to be applied successfully, you must ensure that the ACL rules contain
only the fields defined in the default flow template.
WAN-ACL does not support MPLS intermixing or selective QinQ.
For traffic redirecting, WAN-ACL only supports redirecting traffic to CPU.
An ATM interface/subinterface operating in EoA mode does not support
WAN-ACL. If you have applied a global ACL or VLAN-ACL (the EoA interface and
one or multiple Ethernet ports on the ATM board belong to the VLAN) on an ATM
board, the EoA interface can match the global ACL or VLAN-ACL.
Use the command...
display qos-interface
[ interface-type interface-number ]
mirrored-to
display qos-interface
[ interface-type interface-number ]
traffic-limit
display qos-interface
[ interface-type interface-number ]
traffic-priority
display qos-interface
[ interface-type interface-number ]
traffic-redirect
display qos-interface
traffic-statistic
display qos-interface interface-type
interface-number traffic-statistic
rate [ timeinterval ]
display acl running-packet-filter
8-3
Chapter 8 WAN-ACL Configuration
Remarks
Available in any view