H3C S9500 Series Operating Manual page 18

Operation Manual – QoS
H3C S9500 Series Routing Switches
Configure traffic
redirecting which
applies IP group ACL
and link group ACL at
same time
Remove traffic
redirecting setting
which applies IP group
ACL and link group
ACL at same time
Configure traffic
redirecting which only
applies link group ACL
Remove traffic
redirecting setting
which only applies link
group ACL
Caution:
When the traffic is redirected to a NAT board with the vlanid argument specified, the
port is allowed to exit the specified VLAN (by using the undo command or performing
intermix). If a port leaves a VLAN by accident, you are recommended to remove the
traffic redirecting configuration, add the port to the VLAN again, and then redirect the
traffic to the NAT board with the vlanid argument specified.
To do...
traffic-redirect inbound ip-group { acl-number |
acl-name } rule rule link-group { acl-number | acl-name }
[ rule rule ] { cpu | interface interface-type
interface-number destination-vlan [ l2-vpn | l3-vpn ] |
link-aggregation group groupid destination-vlan |
smart-link group groupid destination-vlan | next-hop
ip-addr1 [ ip-addr2 ] [ invalid { forward | drop } ] | slot
slot-id designated-vlan vlanid [ join-vlan ] }
Or
traffic-redirect inbound ip-group { acl-number |
acl-name } link-group { acl-number | acl-name } rule rule
{ cpu | interface interface-type interface-number
destination-vlan [ l2-vpn | l3-vpn ] | link-aggregation
group groupid destination-vlan | smart-link group
groupid destination-vlan | next-hop ip-addr1 [ ip-addr2 ]
[ invalid { forward | drop } ] | slot slot-id designated-vlan
vlanid [ join-vlan ] }
undo traffic-redirect inbound ip-group { acl-number |
acl-name } { rule rule link-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } rule
rule } or
undo traffic-redirect inbound link-group { acl-number |
acl-name } { rule rule ip-group { acl-number | acl-name } |
ip-group { acl-number | acl-name } rule rule }
traffic-redirect inbound link-group { acl-number |
acl-name } [ rule rule [ system-index index ] ] { cpu |
interface interface-type interface-number destination-vlan
[ l2-vpn | l3-vpn ] | link-aggregation group groupid
destination-vlan | smart-link group groupid
destination-vlan | next-hop ip-addr1 [ ip-addr2 ] [ invalid
{ forward | drop } ] | slot slot-id designated-vlan vlanid
[ join-vlan ] }
undo traffic-redirect inbound link-group { acl-number |
acl-name } [ rule rule ]
Use the command...
1-16
Chapter 1 QoS Configuration