Traffic Priority Marking Configuration Example - H3C S9500 Series Operating Manual

Operation Manual – QoS
H3C S9500 Series Routing Switches
II. Network diagram
Figure 1-6 Network diagram for port mirroring configuration
III. Configuration procedure
# Define a mirroring group, with the monitor port as GigabitEthernet 3/1/8.
<H3C> system-view
[H3C] mirroring-group 1 inbound gigabitethernet3/1/1 gigabitethernet3/1/2
mirrored-to gigabitethernet3/1/8
[H3C] mirroring-group 2 outbound gigabitethernet3/1/1 gigabitethernet3/1/2
mirrored-to gigabitethernet3/1/8

1.4.4 Traffic Priority Marking Configuration Example

I. Network requirements
Re-allocate service parameters according to the mapping table for DSCP 63 for the
packets sourced from PC A (with IP address 1.0.0.1) during the time range 8:00 to
18:00 everyday.
II. Network diagram
GE7/1/1
VLAN2
PC A
1.0.0.1/8
Figure 1-7 Network diagram for priority marking configuration
GE7/1/8
GE7/1/2
VLAN3
PC B
2.0.0.1/8
1-28
Chapter 1 QoS Configuration