Remote Control; Channels; Picture - Philips 5813 series User Manual

Info.
TV switches off by itself
If the TV switches off suddenly, the
setting Switch off timer might be switched
on. With Switch off timer the TV switches
off after 4 hours if no remote control signals
were received. To avoid this automatic
switch off, you can deactivate this switch off.
In Help > User manual, press the colour
key  Keywords and look up Switch Off
Timer.
Also, if the TV does not receive a TV signal
nor a remote control command for 10
minutes, the TV switches off automatically.
17.3

Remote Control

TV does not respond to the remote
control
• The TV requires some time to start up.
During this time, the TV does not respond to
the remote control or TV controls. This is
normal behaviour.
• The batteries of the remote control might
be empty. Replace the batteries with new
ones.
17.4

Channels

No digital channels found during the
installation
• Check if the TV was connected with an
antenna or is using a provider signal. Check
the cable connections.
• Check if the country where you install the
TV, has digital channels available.
• Check if you selected the correct DVB
(Digital Video Broadcast) system.
• Redo the installation and check if you
select the correct country.
No analogue channels found during the
installation
• Check if the TV was connected with an
antenna. Check the cable connections.
• Check if you selected the correct DVB
(Digital Video Broadcast) system. Select DVB-
T (terrestrial) when you use an antenna or
common antenna.
• Redo the installation and select Digital
and analogue channels during the
installation.
Some channels disappeared, cannot find all
or some previously installed channels
• Check if you selected the correct Channel
list or Favourites list you normally use.
• Some channels might be moved or even
deleted by the broadcaster. In the normal
channels list, try to search for the channel
you're missing. If the channel is still
available, you can put it back in
the favourites list.
• A channel can be deleted from
the channel list during Automatic channel
update. These automatic updates are done
overnight if the TV is on standby.
Channels that do not exist anymore are
deleted and new channels will be added to
the channel list. Exceptionally, a channel
can be deleted because the TV could not
find it while checking for its presence. It
might not broadcast at night.
To avoid channels being deleted during
the Automatic channel update because the
TV could not find them although these
channels are still there, you can switch
off Automatic channel update.
 (Home) > Settings > All Settings >
Channels > Antenna/cable
installlation > Automatic channel update
DVB-T2 HEVC channel
• See the technical specifications to make
sure that your TV supports DVB-T2 HEVC in
your country and reinstall DVB-T channel.
17.5

Picture

No picture / distorted picture
55