Turn on TV
Connect Power Cable
• Insert the power cable into
the POWER connector on the back of the
TV.
• Make sure the power cable is securely
inserted in the connector.
• Make sure that the power plug, in the wall
socket, is accessible at all times.
• When you unplug the power cable, always
pull the plug, never pull the cable.
Although this TV has a very low standby
power consumption, unplug the power cable
to save energy if you do not use the TV for a
long period of time.
On or Standby
Before you switch on the TV, make sure you
plugged in the mains power in
the POWER connector on the back of the
TV.
Switch On
• Press the small joystick key on the back of
the TV.
Switch to standby
To switch the TV to standby, press
the remote control. You can also press the
small joystick key on the back of the TV.
In standby mode, the TV is still connected to
the mains power but consumes very little
energy.
To switch off the TV completely, disconnect
the power plug.
When disconnecting the power plug, always
pull the power plug, never the cord. Ensure
that you have full access to the power plug,
power cord and outlet socket at all times.
on
12