Remote Control 9 Connecting Devices Use of remote controller Bottom Connectors Side Connectors 4 Using TV Using Philips EasyLink Turn on the TV or switch to standby Media Center Switch channels Multi-screen interaction To view the connected device(s) Adjust the TV volume...
Laboratories. Dolby, Dolby Audio and the this document.Errors reported to Philips will be applied and published on the Philips support double-D symbol are trademarks of Dolby website as soon as possible.
TP Vision Europe B.V. does not the surface or inside of the TV set, please bear any responsibility for accidents, power off the TV.Please contact Philips’ damage or destruction due to incorrect customer service center, do not use the TV wall mounting of the TV set.
Page 6
4 inches or 10 cm around it to ventilate. out of the box until the TV’s temperature Make sure not to allow curtains or other returns to room temperature before it is objects to cover the vents of the TV set. connected to the power outlet.
Page 7
Please correspondingly reduce the screen brightness and contrast when using the TV set in this way. The ghosting, partial ghosting and other traces displayed on the TV screen for the above reasons are not within the scope of this warranty. Disposal of waste products and batteries Your product is designed and manufactured...
3 TV Overview Remote Control Congratulations for purchasing and using Philips product! In order to enjoy all the supports provided by Philips, please register your TV at www.philips.com/welcome Control Panel (Product shape may vary according to the different models, please refer to the actual...
x Back h TV Press this button to return to the previous Switch to TV source. channel. i Smart star y Help No function. To open user manual. j EPG To open EPG menu. Use of remote controller k SMART TV To enter Smart TV main menu.
4 Using TV » If the standby LED indicator is red, press (Standby-Power on) on the remote control. Switch to standby in the power-on status This section introduces the basic operations of Press the (Standby-Power on) on the • the TV. remote control.
Adjust the TV volume Press to select channels. Press OK to watch the selected channel. Press to switch to the channel you watched previously. To view the connected device(s) Increase or reduce the volume Note Press Volume +/- on the remote •...
5 Using More Press , select [Language] > [Menu languages], then press Feature of Select the language you want, and then your TV press OK. Rename the external devices After an external device is connected through Accessing the TV menu the signal source menu, you can rename it according to your own preferences.
Page 13
Picture style • [Sharpness]: To adjust the sharpness of the image. Apply a predefined picture setting options by [Soft Blue]: Philips SoftBlue is a • using the picture style. revolutionary technology reducing the Press the OPTIONS and select intensity of the harmful spectrum of [Picture style].
Changes the picture format [Movie expand 16:9]: (This does not apply to Press , select [Picture] > [Picture computer mode.)Adjust the format], and then press picture format from 4:3 to 16:9. Picture format summary [Wide screen]: You can configure the following picture settings. Adjust the picture format Note from 4:3 to 16:9.
Using application menus [Cinema]: Applies to the sound • settings of movies. Access the options related to the current • [Game]: Applies to the sound activity or selection. settings of games. Press the OPTIONS while watching TV. [Drama]: Applies to the sound •...
Using sleep timer Lock or unlock one or more channels The sleep timer can switch the TV to standby after a predefined time. Press the OK button to open the channel list. After you select a channel to be locked or •...
Changing TV preferences Updating the TV software Press , and select [TV Settings]. Philips is continuously striving to improve its Select one of the following items, and products, and we recommend updating your then press OK. TV software after updates are launched.
Select [TV Settings] > [Location] > [Shop], and then press OK to watch. Settings when reset to the factory settings You can reset the picture and sound settings to the factory settings. Channel settings will not be reset. Press , and select [TV Settings] > [Picture and Sound reset], and then press OK.
Before connecting the device to the TV set, please back up your files to prevent file damage or data loss.For no support for USB storage devices, Philips assumes no responsibility, and shall not be liable for any damage or loss of data in the device.
Viewing photos and playing Change the slide show settings music and videos from a Press OPTIONS when playing a slide. connected USB storage device. » Display the list of slide show options, and browse photos in accordance with Turn on the TV. the instructions on the screen.
Playing music while viewing slides Enable the Family entertainments sharing to view You can play background music while viewing slides. photos and play music and Select a music album. videos Press OK. Turn on the TV. Press to return to the main screen of the browse page.
Return to the browse page Return to the browse page Listen to music Remove the USB storage device Select Music in the browse page, and then press OK to play. » Change the settings for playing music Note according to the instructions on the screen.
7 Installing Step 2 Search and store new channels channels Press Select [Channels] > [Analog channel The first time you set up your TV, you are manual installation] > [Find prompted to select a menu language and channel]. to install TV channels. This section provides Channel frequency can be entered •...
• Memory space does not mean the usable space. • Philips reserves the right to increase and decrease the right of part of the applications. • Do not arbitrarily change the ROM of the TV, and any resulting failure is not covered under warranty.
Network type » Display of on-screen keypad. You can select the type of network settings. Use the on-screen keypad to enter the [IP address], [Subnet mask], [Gateway] Press , and select [Connection]> and [DNS1] . [Wired or Wireless]. After you have entered, select [OK], then In the [Smart TV] mode, press the press OK.
9 Connecting c Coaxial output Digital audio output to home theater Devices systems and other digital audio systems. This section describes how to connect devices with different connectors. Note • You can use different types of connectors to connect a device to your TV. COAXIAL Bottom Connectors d HDMI 2 /HDMI 3(ARC)
Side Connectors Note • Supported resolution: a Antenna/cable TV HDMI 1: FHD,UHD Signal input from an antenna or cable. ANTENNA b USB 1 / USB2 Data input into USB storage devices. c HDMI 1 Digital audio and video input in Blu-ray disc player and other HD digital devices.
Turn on or off EasyLink and transmit the TV audio to the connected HDMI-CEC audio device. Note • Pease do not enable Philips EasyLink if you do Media Center not intend to use it. You can browse the pictures, videos or music Press and other multimedia files in the USB devices or local media.
Multi-screen interaction You can use a mobile device, such as a Philips W8510, to display the content (the contents to be displayed depends upon the mobile device) on the screen of the mobile device on the TV screen through multi-screen interaction, and...
Video playback: NTSC, PAL • Tuner bands: UHF, VHF • Product information may be subject to change without prior notice.For detailed product Intrinsic Resolution/Sound information, please go to www.philips.com/ power TVsupport • Intrinsic resolution 50PUD6654/30: 3840 x 2160 Supported input signal formats •...
4 x M6 (We recommend an effective thread length Supported TV Mounts of 16MM (without 300 × 200 gaskets), and the To install the TV set, purchase a Philips TV mounting bracket. maximum thread length of 22MM Warning (without gaskets)) •...
• If there is only one channel having poor Philips customer service center. reception, please fine tune this channel. Poor picture quality of the device connected Forget the code to unlock the TV lock: thereto: •...
Check that the sound balance is set to the set in the following Web site: middle. www.philips.com/TVsupport. If the problem is still not resolved, please contact your local Philips customer service center. HDMI connection problem Warning HDMI has a problem: •...
12 Index solely for your personal use. The Software is “in use” when it is loaded into the temporary or permanent memory (i.e. RAM, hard disk, etc.) of the PC or the Device. 2. Ownership. The Software is licensed and not sold to you.
Page 37
Content providers are using the digital rights owners and may be protected by applicable management technology for Windows Media copyright or other intellectual property laws and (“WM-DRM”) to protect the integrity of their treaties. This Agreement grants you no rights content (“Secure Content”) so that their to use such Secure Content.
Page 38
means or methods. Such upgrades may be OR IMPLIED, INCLUDING BUT NOT made available pursuant to the terms of this LIMITED TO THE IMPLIED WARRANTIES Agreement or the release of such upgrades OF MERCHANTABILITY, FITNESS FOR A to you may be subject to your acceptance of PARTICULAR PURPOSE, AND ACCURACY another agreement.
, without reference to its conflict of laws Where you install an application program not principles. Any dispute between you and TP provided by Philips Smart Television APP Store, VISION regarding this Agreement shall be you are deemed to have been fully aware of the subject to the non-exclusive jurisdiction of the aforementioned clauses and disclaimer in full.
Page 40
TP Vision Netherlands B.V. does not make Source: http://www.ffmpeg.org/ARM GPU drive any guarantees, nor any express or implied (r6p0-01rel0) Mali-400/450 GPU Linux Kernel warranties, including any warranty of Device Drivers (r6p0-01rel0) merchantability or fitness for a particular purpose. For the software, TP Vision Netherlands Source: malideveloper.arm.com Khronos Group B.V.
Page 41
China Rohs law Requirement of Usage Control on Electrical and Electronic Product Hazardous Substances Names and Levels of Hazardous Substances Contained in this Product Hazardous Substances Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated Part Name (Pb) (Hg) (Cd) chromium biphenyls (PBB) diphenyl ethers (Cr(VI)) (PBDE)