Software; Update Software - Philips 5813 series User Manual

2

Software

2.1

Update Software

Search for Updates
Update from Internet
 (Home) > Settings > Update software
> Search for updates > Internet
(Recommended)
Look for a software update yourself.
• If the TV is connected to the Internet, you
may receive a message to update the TV
software. You need a high-speed
(broadband) Internet connection. If you
receive this message, we recommend you to
carry out the update.
• During the software update, there is no
picture and the TV will switch off and on
again. This might happen several times. The
update can take a few minutes.
• Wait until the TV picture comes back up. Do
not press the power switch  on the TV or
on the remote control during the software
update.
Update from USB
 (Home) > Settings > Update
software > Search for updates > USB
• You need a computer with an high-speed
Internet connection and a USB memory
device to upload the software on the TV.
• Use a USB memory device with 512MB free
space. Make sure that write protection is
switched off.
1 - Start the update on TV
Select Update software > Search for
updates > USB, then press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An
identification file is written on the USB
memory device.
3 - Download the TV software
- Insert the USB memory into your computer.
- On the USB memory device, locate the
file update.html and double click it.
- Click on Send ID.
- If new software is available, download the
.zip file.
- After the download, unzip the file and
copy the file autorun.upg onto the USB
memory device.
- Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again.
The update starts automatically.
The TV switches itself off for 10 seconds and
then back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the
TV
• press  twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds)
and then back on again. Please wait.
The TV software has been updated. You can
use the TV again.
To prevent an accidental update of the TV
software, delete the autorun.upg file from
the USB memory device.
Local Updates
 (Home) > Settings > Update
software > Search for
updates > USB > Local updates.
For dealers and expert users.
Look for OAD updates (Over-the-
air Download)
6