Network Settings - Philips 5813 series User Manual

1 - Write down the 8-digit PIN code shown
on screen and enter it in the router software
on your PC. Consult the router manual on
where to enter the PIN code in the router
software.
2 - Select Connect to make the
connection.
3 - A message will be shown when the
connection is successful.
Wired Connection
What You Need
To connect the TV to the Internet, you need
a network router with a connection to the
Internet. Use a high-speed (broadband)
connection to the Internet.
Make the Connection
 (Home) > Settings > All
settings > Network > Connect to
network > Wired
1 - Connect the router to the TV with a
network cable (Ethernet cable**).
2 - Make sure that the router is switched on.
3 - The TV constantly searches for the
network connection.
4 - A message will be shown when the
connection is successful.
If the connection fails, you can check the
DHCP setting of the router. DHCP should be
switched on.
**To fulfill EMC regulations, use
a shielded FTP Cat. 5E Ethernet cable.
12.3

Network Settings

View Network Settings
 (Home) > Settings > All
settings > Network > View network
settings
You can view all current network settings
here. The IP and MAC address, signal
strength, speed, encryption method, etc.
Network Configuration - Static IP
 (Home) > Settings > All
settings > Network > Network
Configuration > Static IP
If you are an advanced user and want to
install your network with Static IP
addressing, set the TV to Static IP.
Network Configuration - Static IP
Configuration
 (Home) > Settings > All
settings > Network > Static IP
configuration
1 - Select Static IP configuration and
configure the connection.
2 - You can set the number for IP
Address, Netmask, Gateway, DNS 1,
or DNS 2.
Switch On with Wi-Fi (WoWLAN)
 (Home) > Settings > All
settings > Network > Switch On with Wi-
Fi (WoWLAN)
You can switch this TV on from your
smartphone or tablet if the TV is in Standby.
The setting Switch On with Wi-Fi
(WoWLAN) must be switched on.
Digital Media Renderer - DMR
 (Home) > Settings > All
settings > Network > Digital Media
Renderer - DMR
If your media files do not play on your TV,
46