Contents 13.1 Setup Smart TV 1 Get Support 13.2 Smart TV Start Page 1.1 Identify and Register your TV 13.3 App Gallery 1.2 TV Help and User Manual 14 Netflix 1.3 On-line Help and User Manual 1.4 Consumer Care / Repair 15 Environmental 2 Software 15.1 Energy Label...
On-line Help and User Get Support Manual To solve any Philips TV related problem, you can Identify and Register your TV consult our online support. You can select your language and enter your product model number. Identify your TV - TV model number and serial Go to www.philips.com/TVsupport.
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again.
• Fast forward , to go fast forward • Record , to start recording Quick Guide 3 - Media browser To open or close the Media browser menu. 4 - TV GUIDE Remote Control To open or close the TV Guide. 5 - ...
Bottom Joysticker - Local Control Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… To open the Netflix App directly. With the TV switched on or from standby.
• Make sure the power cable is securely inserted in In case you lost this guide, you can download it the connector. from www.philips.com/TVsupport. • Make sure that the power plug, in the wall socket, is Use the model number of the TV to look for accessible at all times.
if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On •...
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You Copy protection can change the type name if you wish.
Composite Digital Audio Out - Optical CVBS - Composite Video is a standard time quality Audio Out - Optical is a high quality sound connection. Next to the CVBS signal adds the Audio connection. Left and Right signals for sound. This optical connection can carry 5.1 audio channels.
Check if your mobile device is ready for Miracast. Reset Wi-Fi Miracast connection Your TV is a Wi-Fi CERTIFIED Miracast™ device. All previously connected devices are stored in the Wi- With Miracast™, you can watch and share the screen Fi Miracast list of connections. of your smartphone, tablet or computer on your TV screen wirelessly.
USB device to the other USB ports when favorite app store today. formatting. The Philips TV Remote App is available for iOS and 2 - Switch on the USB Hard Drive and the TV. Android and is free of charge.
formatting. 2 - Switch on the USB Hard Drive and the TV. 3 - When the TV is tuned to a digital TV channel, press (Pause). Trying to pause will start the formatting. Follow the instructions on screen. 4 - The TV will ask if you want to use the USB Hard Drive to store apps.
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (left) or (right) and press OK. • To close the source menu without switching to a device, press ...
1 - Select Start now and press OK. 2 - Select Update channels to only add new digital Channels channels. 3 - Select Start and press OK to update channels. This can take a few minutes. Quick reinstall About Channels and Switch ...
With Channel list copy, you can copy the channels installed on one TV onto another Philips TV of the To an already installed TV same range. With Channel list copy, you avoid the 1 - Verify the country setting of the TV.
To open the options menu… Channel List 1 - While watching a channel, press OPTIONS. 2 - Press OPTIONS again to close. Open Channel List Audio Language To open the current channel list… If none of the preferred audio languages are 1 - Press , to switch to TV.
Search Channels Create a favorites List LIST > OPTIONS > Search channel 1 - While watching a TV channel, press LIST to open the channel list. You can search for a channel to find it in a long list of 2 - Select the channel, and press ...
press OK. Audio Language If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language. 1 - While you watch TV, press OPTIONS. 2 - For digital channels, select Audio Language. For analog channels, select Alternate Audio. Press OK to confirm your selection.
Change Day TV guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ...
Set a Recording You can set a recording in the TV Guide. In the TV Guide, a programme set to be recorded is marked with . To see the recording list, press Recordings , a programme set to be recorded is marked with ...
Watch a Recording Recording and To watch a recording… Pause TV 1 - Press TV GUIDE. 2 - Press the color key Recordings . 3 - In the list of recordings, select the recording you want and press OK to start watching. 4 - You can use the Recording keys ...
Replay Since the TV stores the broadcast you are watching, you can replay the broadcast for a few seconds. To replay a current broadcast… 1 - Press (Pause) 2 - Press (Rewind). You can press repeatedly to select from where you want to start viewing the paused broadcast.
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only.
Video Options During the video playback, press OPTIONS to… Subtitles Display the subtitles if available, select On, Off, or On during mute. Character set Select one of system for character. Audio language Play the audio language if available. Status Display file information, like sound mode.
the connected audio system. Open TV Setting Sleep timer - Set the TV to switch to standby automatically after a preset time. Menus Screen off - If you only listen to music on TV, you can switch off the TV screen. 11.1 Picture settings - View Picture menu All settings - View all settings menu.
settings > Picture > Expert mode settings > Color Color, Contrast, Sharpness, Brightness enhancement Adjust the picture color Select Maximum, Medium, or Minimum to set the level of the color intensity and the details in bright (Home) > Settings > All colors.
Press the arrows (up) or (down) to adjust the • Fill screen – automatically enlarges the picture to video contrast level. fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some extreme picture formats may still show black bars. •...
Custom a style You can adjust and stored sound settings in the Delta volume currently selected sound style. (Home) > Settings > All settings > Sound > Advanced > Delta volume Restore a style Press the arrows (up) or (down) to adjust the To restore the style to its original setting, select back delta value for TV speaker volume.
leveling Mouse Settings Adjust the loudness level from device which is (Home) > Settings > All settings > General connected to digital audio output (SPDIF) or HDMI. settings > Mouse settings • Select More to have louder volume. Adjust the motion speed of the USB mouse. •...
switch off energy saving mode. Redo full TV installation , and set TV status back to the first time you switch on Set screen off to save energy consumption (Home) > Settings > General (Home) > Settings > All settings > General settings >...
Set time zone or set a time offset for your region Lock Settings (Home) > Settings > All settings > Region and language > Clock > Time zone Set Code and Change Code Select one of the time zones. ...
(Home) > Settings > All settings > Network > Connect to network > WPS To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. If your router has WPS, you can directly connect to the router without scanning for networks.
1 - Select Static IP configuration and configure the connection. 2 - You can set the number for the IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All settings > Network > Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby.
(Home) > Settings > All settings > Network > Clear Internet Memory With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery favorites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV.
- Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores.
Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby.
• 1080i - 50Hz, 60Hz Product specifications are subject to change without • 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz notice. For more specification details of this product, www.philips.com/TVsupport Power Component, Composite • Mains power: AC 110-240V +/-10% • Ambient temperature: 5°C to 35°C Composite •...
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual.
• To check if the TV is broken, try to play a video clip. Channels Press Settings > Help > Check the TV. If the video clip stays black, call Philips. Wait until the No digital channels found during the installation clip ends and select Contact info in the Help menu.
screen, with black bars on the top and bottom or left • Check if your HDMI devices are HDMI-CEC and right side of the screen, press Picture compatible. EasyLink features only work with devices Format > Fill screen. that are HDMI-CEC compatible. •...
17.10 Wrong Menu Language Change the language back to your language. 1 - Press (Home), select Settings > Region and language > Languages > Menu language and press 2 - Select the language you want and press OK. 3 - Press BACK to close the menu.
The remote control may contain coin-type batteries from the power outlet immediately. which can easily be swallowed by small children. Contact Philips TV Consumer Care to have the TV Keep these batteries out of reach of children at all checked before use.
Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours.
Envision, which is the manufacturer of the for early integration in its products. product. Envision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 21.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software.
The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations.
Pause TV 22 Digital Audio Out - Optical 10 Philips Support 3 Digital Media Renderer - DMR 34 Philips TV Remote App 12 Digital Out Delay 29 Photos, Videos and Music 24 Digital Out Format 29 Picture Clean, Noise Reduction 28...
Remote Control - IR Sensor 6 Remote Control and Batteries 5 Rename Device 14 Repair 3 Reset Settings 31 Safety and Care 45 Screen Off 30 Sharpness 27 Shop Setup 31 Sleep Timer 31 Smart TV 36 Software Version 4 Sound Menu 28 Sound Style 28 Sound, Auto Volume Leveling 29...