Philips 50PUT6604 User Manual
Hide thumbs
Also See for 50PUT6604:
- User manual (64 pages) ,
- User manual (63 pages) ,
- User manual (64 pages)
Related Manuals for Philips 50PUT6604
Summary of Contents for Philips 50PUT6604
- Page 1 Register your product and get support at 6604 series www.philips.com/TVsupport User Manual 50PUT6604 55PUT6604 58PUT6604 65PUT6604...
-
Page 2: Table Of Contents
Contents 13.2 Smart TV Start Page 1 Get Support 13.3 App Gallery 1.1 Identify and Register your TV 14 Netflix 1.2 TV Help and User Manual 1.3 On-line Help and User Manual 15 Amazon Prime Video 1.4 Consumer Care / Repair 2 Software 16 YouTube 2.1 Update Software... -
Page 3: Get Support
Identify and Register your TV Manual Identify your TV - TV model number and serial To solve any Philips TV related problem, you can number consult our online support. You can select your language and enter your product model number. - Page 4 cause severe injury, irrepairable damage to your TV or void your warranty.
-
Page 5: Software
back on again. Please wait. Software Do not . . . • use the remote control • remove the USB memory device from the TV • press twice Update Software • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. -
Page 6: Quick Guide
Quick Guide Remote Control Batteries and Cleaning Replace batteries Standby / On If the TV does not react on a key press on the remote To switch the TV on or back to Standby. control, the batteries might be empty. 2 - ... -
Page 7: Ir Sensor
7 - OPTIONS To open or close the Options menu. IR sensor The TV can receive commands from a remote control Bottom that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV. -
Page 8: Setting Up
To read the instructions, in Help > User manual, press the colour key Keywords and look up Safety and Care. TV Placement • 50PUT6604 VESA MIS-F 200x200, M6 (Minimum 20 mm, Maximum 30 mm) Tips on Placement • 55PUT6604 VESA MIS-F 200x200, M6 (Minimum 20 mm, •... - Page 9 Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
-
Page 10: Connections
Connections Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. Copy protection When you connect a device, the TV recognizes its type and gives each device a correct type name. -
Page 11: Mobile Device
Mobile Device Wi-Fi Direct / Miracast About Wi-Fi Miracast You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room. -
Page 12: Other Device
Download the Philips TV Remote App from your favourite app store today. Block a Device The Philips TV Remote App is available for iOS and Android and is free of charge. The first time you receive a request to connect from a device, you can block the device. - Page 13 USB Hard Drive Formatting Before you can pause or record a broadcast, you Installation must connect and format a USB Hard Drive. Formatting removes all files from the USB Hard If you connect a USB Hard Drive, you can pause or Drive.
-
Page 14: Switch Source
Switch Source Source List • To open the sources menu, press SOURCES . • To switch to a connected device, select the device with the arrows (Right) or (Left) and press OK. • To view the technical information of the connected device you are watching, press ... -
Page 15: Channels
channels Channels 1 - Select Start now and press OK. 2 - Select Update channels to only add new digital channels. 3 - Select Start and press OK to update channels. About Channels and Switch This can take a few minutes. Channels Quick reinstall ... - Page 16 With Channel list copy, you can copy the channels To enter a specific digital frequency yourself, use the installed on one TV onto another Philips TV of the remote control digit keys. Alternatively, select the same range. With Channel list copy, you avoid the...
- Page 17 the TV. 3 - To start the channel list upload, • Both TVs have compatible software versions. press (Home) > Settings > All settings > Channels > Expert mode settings > Channel List Copy > Copy to TV and press OK.
-
Page 18: Channel List
Audio Language Channel List If none of the preferred audio languages are available, you can select another audio language if Open Channel List available. If no audio languages are available, you cannot select this option. To open the current channel list… To read more information, in Help, press the colour 1 - Press , to switch to TV. -
Page 19: Favourite Channels
lock a channel. To watch a locked channel, you must Create or Edit Favourites Channel List enter the 4 digit Child Lock PIN code first. You cannot lock programmes from connected devices. > OK > OPTIONS > Create favourites list The locked channel will have ... -
Page 20: Text / Teletext
5 - Once completed, press Done. subject at the bottom of the screen. Text sub-pages A Text page number can hold several subpages. The Favourites List on TV Guide subpage numbers are shown on a bar next to the main page number. - Page 21 1 - Press TEXT. 2 - With Text/Teletext open on screen, press OPTIONS. 3 - Select Text 2.5 > Off. 4 - Press (left) repeatedly if necessary, to close the menu.
-
Page 22: Tv Guide
Change Day TV Guide If the TV guide information comes from the broadcaster, you can press + to view the schedule of one of the next days. Press - to go back to the previous day. What You Need Alternatively, you can press ... - Page 23 Set a Recording You can set a recording in the TV Guide. To record a programme… 1 - Press TV GUIDE and select a future or ongoing programme. 2 - Press the colour key Record . To cancel a recording… 1 - Press ...
-
Page 24: Recording And Pause Tv
To record a programme… Recording and 1 - Press TV GUIDE. 2 - On the TV guide, select the channel and programme you wish to record. Press (Right) Pause TV or (Left) to scroll through the programmes of a channel. -
Page 25: Pause Tv
8 - Select Schedule and press OK to schedule the Replay manual recording. The recording will appear in the list of scheduled Since the TV stores the broadcast you are watching, recordings and reminders. you can mostly replay the broadcast for a few seconds. -
Page 26: Videos, Photos And Music
Photo Options Videos, Photos and With a photo on screen, press OPTIONS to… Music List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on 10.1 View the pictures in sequential order, or at random. From a USB Connection Repeat, Play once View the pictures repeatedly or once only. -
Page 27: Videos
360 Photo Options Video Options With a 360 photo on screen, press OPTIONS to… During the video playback, press OPTIONS to… List/Thumbnails List/Thumbnails View 360 photos with list view or thumbnails view. View video files with list view or thumbnails view. Shuffle off, Shuffle on Subtitles View the pictures in sequential order, or at random. -
Page 28: Open Tv Setting Menus
ideal sound settings. • Audio out - Set the TV to play the sound on TV or Open TV Setting on the connected audio system. • Ambilight style* - Select one of preset Ambilight Menus styles. • Ambilight+hue* - Switch Ambilight+hue on or off. •... - Page 29 not supported in Monitor mode. The TV is able to play (Home) > Settings > All HDR video in Monitor mode but no HDR processing settings > Picture > Contrast will be applied. Press the arrows (up) or (down) to adjust the contrast value of the picture.
- Page 30 Select Normal, Warm, or Cool to set the colour Dynamic Contrast temperature for your preference. (Home) > Settings > All settings > Picture > Expert mode Customise colour temperature settings > Dynamic contrast (Home) > Settings > All Select Maximum, Medium, or Minimum to set the settings >...
- Page 31 different degress of smoothing the artefects in digital extreme picture formats can still show black bars. video content. Picture content aspect ratio may change. MPEG artefacts are mostly visible as small blocks or • Fit to screen – automatically zooms in the picture jagged edges in on-screen images.
- Page 32 • Original - Most neutral sound setting Select On a TV stand or On the wall to have best • Movie - Ideal for watching movies sound reproduction according to the setting. • Music - Ideal for listening to music •...
- Page 33 the TV speakers when the device is playing the • If you cannot set a delay on the Home Theatre sound. System, you can set the TV to sync the sound. • You can set an offset that compensates for the time necessary for the Home Theatre System to process the sound of the TV picture.
- Page 34 HDMI source, you may need to power off your player Switch on EasyLink and power on again when the player connected to TV (Home) > Settings > All settings > General playing such content for the first time. HDR10+ or settings >...
- Page 35 Download new demo file Shop Setup (Home) > Apps > Demo me > Manage demos > (Home) > Settings > All settings > General Download new settings > Shop setup If the Configuration is set to Main TV, you can If the TV is set to Shop, you can view feature logos or download new demo file.
- Page 36 (Home) > Settings > All settings > Region and (Home) > Settings > All settings > Region and language > Language > Menu language language > Clock > Date, Time Go to previous menu, and select Date and Time to adjust the value.
- Page 37 This lock is only valid for 18+ rated apps (Home) > Settings > All settings > Universal from the Philips apps. access > Audio description > Audio description > Digital TV channels can broadcast special audio commentary describing what is happening on screen.
-
Page 38: Wireless And Networks
If your router has WPS, you can directly connect to the router without scanning for networks. If you have To enjoy the full capabilities of your Philips Smart TV, devices in your wireless network that use the WEP your TV must be connected to the Internet. -
Page 39: Wireless And Network Settings
1 - Select Static IP configuration and configure the connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN) (Home) > Settings > All settings > Wireless and networks >... - Page 40 With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery favourites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared.
-
Page 41: Smart Tv
Search Smart TV With Search, you can search the App Gallery for relevant Apps. Enter a keyword in the text field, select and 13.1 press OK to start searching. You can enter names, Setup Smart TV titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a The first time you open Smart TV, you need to... -
Page 42: Netflix
Netflix If you have a Netflix menbership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. -
Page 43: Amazon Prime Video
Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. -
Page 44: Youtube
YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. -
Page 45: Environmental
Environmental 17.1 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. -
Page 46: Specifications
HD (50Hz or 60Hz) YCbCr 4:2:0 signals. Display Resolution Diagonal screen size Composite • 50PUT6604 : 126 cm / 50 inch • 55PUT6604 : 139 cm / 55 inch Composite • 58PUT6604 : 146 cm / 58 inch • 65PUT6604 : 164 cm / 65 inch •... -
Page 47: Sound
• Digital Audio out: Optical 18.6 • USB 1: USB 2.0 Sound • Network LAN: RJ45 • Antenna (75 ohm) • Dolby Atmos® Virtualizer • HDMI 1 in: ARC - UHD - HDR • Clear Dialogue • HDMI 2 in: UHD - HDR •... -
Page 48: Troubleshooting
Philips startup screen > User manual to find the information you are looking When the TV is in standby, a Philips startup screen is for. Select a keyword to go the most relevant page in displayed, then the TV returns to standby mode. This the User manual. -
Page 49: Picture
Press (Home) > Settings > Help > Check the TV. • Redo the installation and check if you select the If the video clip stays black, call Philips. Wait until the correct country. clip ends and select Contact info in the Help menu. -
Page 50: Sound
If an on screen promotion banner appears 19.7 occasionally or the Picture style automatically HDMI - UHD switches back to Vivid at startup, the TV is in Shop location. Set the TV to Home location for use at HDMI home. •... -
Page 51: Wi-Fi And Internet
19.9 Wi-Fi and Internet Wi-Fi network not found or distorted • Check if the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Internet does not work •... -
Page 52: Safety And Care
Contact Philips TV Consumer Care to have the TV • NEVER place a television set in an unstable location. checked before use. • NEVER place the television set on tall furniture (for •... -
Page 53: Screen Care
Lightning Storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of Hearing Damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. -
Page 54: Terms Of Use
TP Vision, which is the manufacturer of the for early integration in its products. product. TP Vision is the warrantor in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. -
Page 55: Copyrights
22.4 DTS-HD (italics) Copyrights DTS 22.1 For DTS patents, see http://patents.dts.com. HDMI Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol The terms HDMI and HDMI High-Definition together, DTS-HD, and the DTS-HD logo are Multimedia Interface, and the HDMI Logo are registered trademarks and/or trademarks of DTS, Inc. -
Page 56: Open Source
P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both Open Source programming and interactive use. In addition, most sh scripts can be run by Bash without modification. 23.1 Source: http://www.gnu.org/software/bash/ Open Source Software c-ares (1.10.0) This television contains open source software. - Page 57 The GNU Find Utilities are the basic directory Source: http://www.gnu.org/software/inetutils/ searching utilities of the GNU operating system. These programs are typically used in conjunction with iptables (1.4.15) other programs to provide modular and powerful For Cross connection. directory search and file locating capabilities to other Source: http://www.netfilter.org/projects/iptables/ commands.
- Page 58 libusb. ain_Page This piece of software is made available under the terms and conditions of the libusb license, which can mtd-utils be found below. The aim of the system is to make it simple to provide Source: a driver for new hardware, by providing a generic http://libusb.wiki.sourceforge.net interface between the hardware drivers and the upper http://www.libusb.org/...
- Page 59 procps (ps, top) (3.2.8) to run . procps is the package that has a bunch of small This piece of software is made available under the useful utilities that give information about processes terms and conditions of the u-Boot loader license, using the /proc filesystem.
-
Page 60: Disclaimer Regarding Services And/Or Software Offered By Third Parties
Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations. -
Page 61: Index
Digital Out Menu 33 Pause TV 25 Digital Out Offset 33 Philips Support 3 Dynamic Contrast 30 Philips TV Remote App 12 Photos, Videos and Music 26 Picture Clean, Noise Reduction 30 End of Use 45 Picture Contrast Menu 30... - Page 62 Quick Picture Settings 31 Video Contrast 30 Quick Settings Menu 28 View Network Settings 39 Viewing Distance 8 Recordings 24 Register TV 3 Wi-Fi 39 Remote Control 6 Remote Control - IR Sensor 7 Remote Control and Batteries 6 Remote Control Key 6 Rename or replace device icon 14 Repair 3 Reset Settings 35...