Quick Guide; Remote Control - Philips 5813 series User Manual

3

Quick Guide

3.1

Remote Control

Batteries and Cleaning
Replace batteries
If the TV does not react on a key press on
the remote control, the batteries might be
empty.
To replace the batteries, open the battery
compartment on the back of the remote
control.
1 - Slide the battery door in the direction
shown by the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure
the + and the - ends of the batteries line up
correctly.
3 - Reposition the battery door and slide it
back until it clicks.
• Remove the batteries if you are not using
the remote control for a long time.
• Safely dispose of your old batteries
according to the end of use directions.
Cleaning
Your remote control is treated with a scratch-
resistant coating.
To clean the remote control, use a soft damp
cloth. Never use substances such as alcohol,
chemicals or household cleaners on the
remote control.
Key Overview
Top
1 -  Standby / On
To switch the TV on or back to Standby.
2 - Playback and Record
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to start recording
3 -  Media browser
To open or close the Media browser menu.
4 -  TV GUIDE
To open or close the TV Guide.
5 -  Search
To open the Smart TV searches page.
6 -  Settings
To open the Quick settings menu.
7 -  SOURCES
To open the Sources menu.
8 -  LIST
To open or close the channel list.
Middle
8