Philips 5813 series User Manual page 39

Set the TV to play the sound on TV or on the
connected audio system.
You can select where you want to hear the
TV sound and how you want to control it.
• If you select TV speakers off, you
permanently switch off the TV speakers.
• If you select TV speakers, the TV speakers
are always on.
With an audio device connected with HDMI
CEC, select HDMI sound system. The TV
will switch off the TV speakers when the
device is playing the sound.
Digital Output Settings
Digital output settings are available for
SPDIF output (optical) and HDMI ARC sound
signals.
Digital out fomat
 (Home) > Settings > All
settings > Sound > Advanced > Digital
out format
Set the audio out signal of the TV to fit the
sound capabilities of the connected Home
Theatre System.
• Stereo: If your audio playback devices have
no multichannel sound processing, select to
only output stereo content to your audio
playback devices.
• Multichannel: Select to only output 5.1
audio content (compressed multichannel
sound signal) to your audio playback
devices.
• Dolby Digital Plus: Select to output Dolby
Digital Plus or DTS content to your audio
playback devices or Home theatre system.
- Make sure your audio playback devices
support Dolby Atmos feature.
- SPDIF output (DIGITAL AUDIO OUT) will
be disabled when streaming Dolby Digital
Plus content.
Digital out levelling
 (Home) > Settings > All
settings > Sound > Advanced > Digital
out levelling
Adjust the loudness level from device which
is connected to digital audio output (SPDIF)
or HDMI.
• Select More to have louder volume.
• Select Less to have softer volume.
Digital out delay
 (Home) > Settings > All
settings > Sound > Advanced > Digital
out delay
For some Home Theatre Systems you might
need to adjust the audio sync delay to
synchronise the audio to the
video. Select Off if a sound delay is set on
your Home Theatre System.
Digital out offset (Only available
when Digital out delay set to On)
 (Home) > Settings > All
settings > Sound > Advanced > Digital
out offset
• If you cannot set a delay on the Home
Theatre System, you can set the TV to sync
the sound.
• You can set an offset that compensates for
the time necessary for the Home Theatre
System to process the sound of the TV
picture.
• You can set the value in steps of 5ms.
Maximum setting is 60ms.
Channels
TV Guide
 (Home) > Settings > All
Settings > Channels > TV guide
39