Figure 48. Checking A Led (1) - Samsung 310 5G CPE Installation Manual

Figure 48. Checking a LED (1)

- When the status of the LED is 'Amber on' or 'Green on', you can finish the
installation. But it is recommended that you adjust the angle of installation for the
CPE to ensure 'Green on'.
- If the 'Red on' status persists, then the direction of the CPE must be adjusted to
make the 'Amber on' or 'Green on' status.
- Contact a person in charge to take action if the 'Red on' status persists when you
adjust the CPE direction.
3
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
LED Cover
After checking whether the CPE Outdoor is in working order, close the LED
cover.
Confidential
Chapter 3 Connecting Cables
49