Interface Cable Connection
This section describes the procedures to connect interface cables.
Remove Ethernet Cable
1
Table 19. Tools for Remove Ethernet Cable
Category
Working Tools
2
Figure 36. Remove Ethernet Cable (1)
Cable Gland Nut
3
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
To remove an Ethernet cable from the CPE Outdoor
Ensure that the items mentioned in the table below are available.
Unfasten the cable gland nut and separate the filler from the cable gland body.
Remove the RJ-45 plug from the system side's LAN port. Press the latch with
the fingers, remove the cable from the connector.
Description
Spanner (Hexagon Head: 42 mm)
Cable Gland Nut
Confidential
Chapter 3 Connecting Cables
Cable Gland Body
Filler
Cable Gland Nut
41