2
Table 10. Drilling Example
1
Table 11. Parts and Tools for Fixing Mounting Bracket on the Wall
Category
Parts
Recommended Torque Value
Working Tools
2
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Drill anchor holes at the marked points. Remove dust from the holes using a
vacuum cleaner.
To fix the mounting bracket on the wall
Ensure that the items mentioned in the table below are available.
Description
Mounting Bracket
Fastener
M4 PH+ Tapping Screw
Torque Driver (6~22 lbf·in)
Screw Driver Bit ('+', No. 2)
Fix the Φ 6 plastic anchors to the holes drilled on the wall.
Hammer Drill
M4 × L25 PH+ Taptite Screw
Φ 6 × L30 Plastic Anchor
Confidential
Chapter 2 Installing System
Vacuum Cleaner
1/4 in.
(6 mm)
1 EA
4 EA
4 EA
13 lbf·in (15 kgfcm)
22