Recommended Action For Field Diagnostics According To Ne 107; Resource Block - Pepperl+Fuchs FieldConnex F2D0-MIO-Ex12.FF Series Manual

Multi-Input/Output Device
Troubleshooting and Diagnosis
5.2

Recommended Action for Field Diagnostics according to NE 107

Alarm Type
Maintenance required
Failed
Function Check
5.3

Resource Block

Problem
Parameter
BLOCK_ERR Lost Static
RS_STATE
48
Diagnostic Event
Configuration error
Stroke counter exceeded
Valve maintenance
Valve failure
Sensor lead fault
Valve lead fault
Device failure
Check
Troubleshooting
Message Cause
The parameterization data
Data stored in the device were
faulty and replaced by the
default settings.
Device Hardware error.
Maintenance
Simulation Switch 1 is set to "Simulation
enabled".
OOS The target mode of the block
is OOS.
Online No error.
Failure Hardware error.
Stand-by The target mode of the block
is OOS.
Online Linking One or several communication
links to other field devices are
not established.
Alarm Text String
Check blocks for configuration
error.
Check transducer blocks for
more details.
Send the device to
Pepperl+Fuchs for repair.
Check block modes according
to normal mode.
Solution
Repeat parameterization. If
this error occurs repeatedly,
send the device to
Pepperl+Fuchs for repair.
Send device to
Pepperl+Fuchs for repair.
Check if the simulation setting
was intended.
Set block to "Auto" mode.
Send device to
Pepperl+Fuchs for repair.
Set block into "Auto" mode.
Check whether all necessary
field devices are available at
the segment.
Check configuration.