Parameterization And Operation; Introduction - Pepperl+Fuchs FieldConnex F2D0-MIO-Ex12.FF Series Manual

Multi-Input/Output Device

Parameterization and Operation

4 Parameterization and Operation
The following section explains how to parameterize and operation the *D0-MIO-Ex12.FF
devices.
4.1

Introduction

The MIO FOUNDATION Fieldbus device supports 1 resource block, 4 transducer blocks, and
multiple function blocks. The I/O hardware channels are fixed assigned to the transducer
blocks.
Also, a "communication stack" is available that organizes the data exchange between the
fieldbus and the application. Depending on the mode of operation, a selection of instantiable
function blocks are available.
Function Block Overview
Function Block Type
DO, Discrete Output
DI, Discrete Input
AI, Analog Input
MDO, Multiple Discrete
Output
MDI, Multiple Discrete Input
Table 4.1
28
1,2,3 4,5,6 7,8,9 10,11,12
Hardware Channels
Max. Number of Function
Blocks*
4
12
1
1
2
*The MIO device supports instantiable function blocks. Refer to your control system
documentation for information on how to instantiate function blocks.
Resource
Block
Communication
Stack
Physical Layer
FF-H1
Default Number of Function
Blocks
4
2
1
1
2