Table of Contents
Advertisement
Bluetooth HID Variable PIN Code
Specifies the selection available for Static or Variable Pin Code, when Blue-
tooth HID profile is configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)
require a Variable PIN Code. When attempting connection, the application
presents a window that includes a PIN Code which is to be input using the
Wasp WWS750. Scan the barcode "Variable PIN Code" below, then use the
host computer's Bluetooth manager to "Discover new devices" and select
"Wasp Scanner." Use a text editor to see incoming data on the port desig-
nated by the computer's Bluetooth manager.
When you hear the beep and see the Green LED blinking indicating the
reader is waiting for an alphanumeric entry, enter the required variable PIN
Code by scanning the corresponding barcodes in
alphanumeric entry. Finish by scanning the Exit HID Variable PIN Code label.
$CBTHP00
Set Static Pin Code
~
CANCEL
Product Reference Guide
If you receive an error message, it may be necessary to disable
security on the device.
$CBTHP01
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Exit HID Variable PIN Code
Enter/Exit Programming Mode
Appendix D, Keypad
DEFAULT
DEFAULT
Set Variable Pin code
for
221
Advertisement
Table of Contents
