Code 11 Set Length 2 - Wasp WDI7500 Product Reference Manual

Enter/Exit Programming Mode

Code 11 Set Length 2

This feature specifies one of the barcode lengths for
trol. Length 2 is the maximum label length if in
second fixed length if in
check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 17
instructions on setting this feature.
Table 17. Code 11 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC1.2
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start
again at the beginning.
144
Fixed Length
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Code 11 Length Con-
Variable Length
Mode. Length includes the barcode's
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Wasp WDI7500/WWS750
Mode, or the
page 241 for detailed
50 Characters
'5' and 0'