Replacing The Service Door - HP Elitebook 820 G1 Getting Started

Replacing the service door

Replace the service door after accessing the battery, memory module slot, hard drive, regulatory
label, and other components.
To replace the service door:
1. Tilt down the service door to align the front edge of the service door near the front edge of the
computer (1).
2. Slide the service cover forwards (2) until it snaps into place.
3. With the battery bay toward you, slide the service door release latch to the right (3), and if you
choose to, insert and tighten the optional screw (4) to hold the service door in place. Slide the
release latch to the left to lock the service door (5).
NOTE: If you want to use the optional screw, it is stored inside the service door.
Removing or replacing the service door 63