Replacing Or Upgrading The Hard Drive; Removing The Hard Drive - HP Elitebook 820 G1 Getting Started

Hide thumbs Also See for Elitebook 820 G1:

Table of Contents

With the battery bay toward you, slide the service door release latch to the right (3), and if you

choose to, insert and tighten the optional screw (4) to hold the service door in place. Slide the

release latch to the left to lock the service door (5).

NOTE:

Replacing or upgrading the hard drive

CAUTION:

Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the

hard drive while the computer is on, in the Sleep state, or in Hibernation.

If you are not sure whether the computer is off, turn the computer on by pressing the power button.

Then shut down the computer through the operating system.

To remove a hard drive:

Save your work and shut down the computer.

Disconnect AC power and external devices connected to the computer.

Turn the computer upside down on a flat surface.

Remove the service door (see

battery (see

Chapter 8 Drives

If you want to use the optional screw, it is stored inside the service door.

To prevent information loss or an unresponsive system:

Removing or replacing the service door on page

Inserting or removing the battery on page

32).

43) and the

Table of Contents