Using Computer Setup Automatic Drivelock - HP Elitebook 820 G1 Getting Started
Hide thumbs
Also See for Elitebook 820 G1:
- Maintenance and service manual (192 pages) ,
- Quickspecs (63 pages) ,
- Overview (61 pages)
Table of Contents
Advertisement
6.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
7.
Use a pointing device or the arrow keys to select Disable protection.
8.
Type your master password, and then press enter.
9.
To save your changes and exit Computer Setup, click the Save icon and then follow the on-
screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Using Computer Setup Automatic DriveLock
In a multiple-user environment, you can set an Automatic DriveLock password. When the Automatic
DriveLock password is enabled, a random user password and a DriveLock master password will be
created for you. When any user passes the password credential, the same random user and
DriveLock master password will be used to unlock the drive.
NOTE:
A BIOS Administrator password must be set before you can access the Automatic
DriveLock features.
Entering an Automatic DriveLock password
To enable an Automatic DriveLock password in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Security > Automatic DriveLock, and then
press enter.
4.
Enter the BIOS Administrator password, and then press enter.
5.
Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
6.
Read the warning. To continue, select YES.
7.
To save your changes and exit Computer Setup, click the Save icon and then follow the on-
screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Removing Automatic DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
56
Chapter 9 Security
f10
to enter Computer Setup.
f10
to enter Computer Setup.
esc
while the "Press the ESC key for Startup
esc
while the "Press the ESC key for Startup
Advertisement
Table of Contents
